Ricoh MP 6503 User Manual page 183

When there is a problem with the print settings
Message
"Booklet/Half Fold Error"
"Classification Code is
incorrect."
"Classification Code is
incorrect."
"Duplex Cancelled"
"Exceeded Max. Pages
(Collate)"
"Exceeded the maximum
number of multi-sheet fold (Half
Fold)."
"Output Tray Changed"
Messages Displayed When You Use the Printer Function
Cause
The job was canceled because
you specified invalid settings for
saddle stitching or half fold.
The classification code has not
been entered, or the
classification code has been
entered incorrectly.
The classification code is not
supported with the printer
driver.
Duplex printing was canceled.
The number of pages exceeds
the maximum number of sheets
that you can use Collate with.
The maximum number of multi-
sheet folds (Half Fold) was
exceeded.
The output tray was changed
because the paper size of the
specified output tray is limited.
Solution
Check the settings for saddle
stitching or half fold.
Enter the correct classification
code.
Select [Optional] for
classification code. For details
about how to specify
classification code settings, see
"Configuring Classification
Codes", Print.
Change the setting for "Apply
Duplex" in [Tray Paper Settings]
to enable duplex printing for the
paper tray. For details about
setting "Apply Duplex", see
"Tray Paper Settings",
Connecting the Machine/
System Settings.
Reduce the number of pages to
print.
For details about the maximum
number of multi-sheet folds (Half
Fold), see "Fold", Print.
Specify the proper output tray.
181