Troubleshooting On Power Led Display - Fujitsu PRIMERGY SX10 S2 User Manual

5.2

Troubleshooting on Power LED Display

Even when the power switch is set to "|", the power cannot be turned
on.
(POWER LED is not lit green)
What is the status of the Power LED?
Lit up amber
or
Blinking green
The power cable is connected
properly?
Proper power AC line voltage is
supplied to the outlet?
The power cable is damaged?
The cables in this product are
connected correctly?
The power switch is set to "|"?
This product may fail.
Contact maintenance support.
Off
No No
No No
No No
No No
No No
Connect it properly.
"4.2 Connecting the Power
Cable" (p.76 )
Supply it.
Contact maintenance support.
Connect them correctly.
"2. Installing Internal Options"
(p.56)
Set it to "|".
"1.1.1 LED Panel" (p.52)
5 Troubleshooting
E
79