Fujitsu PRIMERGY SX10 S2 User Manual page 68

6
Attach the removed drive bay fixed rails to the backup unit to be
connected.
When the screws are provided with the backup unit to be connected, use them. If not, use four
screws of the screws that were removed in Step 5 to attach the fixed rails.
7
Pull out the SCSI cable kit from the drive bay, and connect the
SCSI cable and power cable to the backup unit.
SCSI cable kit
Coupling tool
8
Attach the coupling tool aligning it with the screw hole position of
the drive bay fixed rail.
68
[Drive bay fixed rail]
Power cable
[Backup unit]
Coupling tool
Align the hole with the screw hole
of the fixed rail.
SCSI cable