Fujitsu PRIMERGY SX10 S2 User Manual page 69

Coupling tool attachment position differs depending on the drive bay.
For the directions in Step 7, the attachment position is as follows.
• Drive bays 1 and 2: Left side of backup unit
• Drive bays 3 and 4: Right side of backup unit
9
Install the backup unit in the drive bay.
Insert it until it clicks.
10
Attach the front panel.
Hook the front panel on the notches to attach the front panel.
Notches
Hooks
11
Turn the grommet tabs (two locations) lengthwise as shown in the
figure below, and push them.
Close
The grommet may be tough. Push it until it clicks.
12
Attach the top cover.
" Attaching the top cover"(p.57)
2 Installing Internal Options
E
69