Fujitsu PRIMERGY SX10 S2 User Manual page 62

4
Align the protrusions of the SCSI cable kit with the holes shown in
the following cable holder figure.
5
Attach the tag label to each cable and connector of the SCSI cable
kit.
The tag label is provided with the SCSI cable kit.
Attach the tag label corresponding to the drive bay number to be used.
How to attach to the SCSI cable
Twist the label around the cable on the I/O module connection side, so that the drive name
can be seen.
Connector
How to attach to the connector of the power cable
Z
62
[I/O module connection side]
Align with the holes.
[Drive bay connection side]
SCSI cable kit
[I/O module connection side]
1.
DRIVE 1
SCSI cable
Tag label
Align the left side of the label with
the connector protrusion.
Align the protrusions
with the holes.
4
1 3
Cable holder
2.
DRIVE 1