Fujitsu PRIMERGY SX10 S2 User Manual page 82

The cables in this product are
connected correctly?
The power switch is set to "R"?
The connected server is running?
Even when the power switch is set to "R", the power cannot be
turned off.
(Power LED does not blink green)
All the connected servers' power
are turned off?
82
This product may fail.
Contact maintenance support.
When setting the power switch to
" ", the power is turned off?
The Term Power settings of the
drive that is installed is set to
"OFF"?
This product may fail.
Contact maintenance support.
Connect them properly.
No No
"2. Installing Internal Options" (p.56)
No No Set the power switch to "R".
No No
Boot the server.
Turn off all the connected servers'
No No
power.
Deal with this problem referring to
No No
"Even when the power switch is set
to " ", the power cannot be turned
off." (p.80)
Refer to each backup unit's manual
for the settings, and set the Term
No No
Power setting to "OFF".