Configuration - Adaptrum ACRS 2.0 Quick Start Manual

Adaptrum ACRS2.0 Quick Start Guide (International)

Configuration

To remote update CLIENT configuration, in the BASE GUI, go to the Link tab, Link List View sub-tab.
Right-click on desired target name in Notes column; if there's no name under Notes, right-click in the
empty space (and add System Notes when the Remote Config window opens).
Right-click opens a pop-up;
select the desired operation, e.g. Update Configuration.
This opens the Remote Config window
Edit any/all fields as desired. See MAC Address Specification discussion to modify MAC Filter Table.
Make sure Auto Channel is checked so unit will auto-connect after reboot.
Save Settings to Remote and Reboot Make sure Auto Update is not enabled when you do this.
Note: If the AdaptrumTVBD GUI is running on the target CLIENT, it will need to be restarted.
2016.05.16 Adaptrum© 2016 P a g e 53 | 64
support@adaptrum.com All Rights Reserved Worldwide