Figure 25: Gui Screenshot: Client System Information Tab; Table 7: Client System Information Field Descriptions - Adaptrum ACRS 2.0 Quick Start Manual

CLIENT
The CLIENT's version of the System Information tab is similar to the BASE's, sans a few fields, as shown
below:

Figure 25: GUI screenshot: CLIENT System Information tab

Note: Fields in gray font are reserved for Adaptrum diagnostic use.
# FIELD
1 Radio Software Ver
2 GUI Version
3 Heap Size
4 Boot ID
5 SW Log
6 Radio Hardware Ver
7 Temperature
8 Link Test results
9 Link Test
10 Base Station MAC
11 Base Station Loc
12
13
14
15
16 WS Channels
17 RCV FID
18 Scan Channels
19 Scan Channel Set

Table 7: CLIENT System Information Field Descriptions

2016.05.16
support@adaptrum.com
Adaptrum ACRS2.0 Quick Start Guide (International)
version number of radio soft/firmware
version number of AdaptrumTVBD GUI
software heap size
reserved for diagnostics: boot sequence number
reserved for diagnostics: initiates capture of unit messages
version number of hardware image
board temperature in degrees C; updated by Device & Channel pane fields #6 & #7
packets sent/received and Lost count results for "Link Test" (field #9)
initiates packet transmissions for test; results found in field #8
Base Station ID
LAT/LNG/AGL of this BASE unit (entered in Database tab field #2)
set of channel numbers authorized for CLIENT by database source
reserved
"Channel Set" means CLIENT is constrained to using channels specified by field #19
all channels specified in the Channel Set
Adaptrum©
All Rights Reserved Worldwide
DESCRIPTION
(Channel Scan List)
2016 P a g e 44 | 64