Device & Channel Pane; Figure 31: Gui Screenshot: Base Device & Channel Pane; Figure 32: Gui Screenshot: Client Device & Channel Pane; Table 13: Device & Channel Pane Field Descriptions - Adaptrum ACRS 2.0 Quick Start Manual

Device & Channel pane
This pane is always displayed at the bottom of the GUI. It is used to select the link channel, activate the
link (Start Service, from BASE only), and to update link status either once (Update Status button) or
continuously (Auto Update checkbox).
BASE (initial view)
Figure 31: GUI screenshot: BASE Device & Channel pane
BASE (after CLIENT connection)
CLIENT (initial view)
Figure 32: GUI screenshot: CLIENT Device & Channel pane
CLIENT (after BASE connection)
# FIELD
- Fixed, PPI, PPII
1 Persistent Channel
2 Auto Channel
3 Channel Selector
Start Service
4
Stop Service
5
Update Status
6
7 Auto Update
8 Message window
Table 13: Device & Channel pane Field Descriptions
2016.05.16
support@adaptrum.com
Adaptrum ACRS2.0 Quick Start Guide (International)
Do not leave Auto Update
diagnostic functions reserved
if checked, causes unit to connect on selected channel (field #3) after each reboot
if checked, enables unit to scan through channel list (BASE Database tab field #11 or
CLIENT Database tab field #17) in search of finding the best channel
in manual mode, allows user to select a specific channel; in auto-mode, specifies the
channel being used for current link
BASE only: initiates transmission
BASE only: halts transmission
manual, one-time update of channel status reported on Link tab(s)
if checked, initiates continuous update reported on Link tab(s)
displays relevant subset of software messages
Adaptrum©
All Rights Reserved Worldwide
on during normal operation.
DESCRIPTION
for Adaptrum's use only
2016 P a g e 50 | 64