Figure 8: Ethernet Connector In Place; Figure 9: Ethernet Cable With Weather-Resistant Boot Secured In Acrs Enclosure - Adaptrum ACRS 2.0 Quick Start Manual

Adaptrum ACRS2.0 Quick Start Guide (International)
Insert the Ethernet connector into the ACRS RJ-45 jack.

Figure 8: Ethernet connector in place

Finally, slide the weather boot into place; ensure that the ridged portion of the soft shell is secured
within the ridged metal edges of the ACRS enclosure.

Figure 9: Ethernet cable with weather-resistant boot secured in ACRS enclosure

This completes the Ethernet cable mounting to the unit.
2016.05.16 Adaptrum© 2016 P a g e 24 | 64
support@adaptrum.com All Rights Reserved Worldwide