Start Service - Adaptrum ACRS 2.0 Quick Start Manual

Adaptrum ACRS2.0 Quick Start Guide (International)
To select the best channel, go to the Device & Channel pane
Select the desired channel from the pull-down
Check Persistent Channel if you want this channel to be used after reboot [recommended]
Return to the Installation tab
Save All Settings To Target and Reboot

Start Service

Re-launch AdaptrumTVBD
In the pop-up, pull down TVBD IP choices, select BASE unit, Connect
If Persistent Channel was checked, the unit will auto-start service (the Start Service button will be gray)
rd
and the Transmit/Link LED (3 -from left) will be illuminated (blue)
Otherwise, if the Persistent Channel was not checked, you need to Start Service

The BASE is now transmitting.
2016.05.16 Adaptrum© 2016 P a g e 15 | 64
support@adaptrum.com All Rights Reserved Worldwide