Figure 5: Ethernet Cable With Weather-Resistant Boot Assembly; Figure 6: Ethernet Cable With Weather-Resistant Boot Assembled; Figure 7: Ethernet Cable Weather Seal - Adaptrum ACRS 2.0 Quick Start Manual

Adaptrum ACRS2.0 Quick Start Guide (International)
Insert the Ethernet cable first through the weather-resistant boot hard shell and then through the soft
shell, as shown in

Figure 5: Ethernet cable with weather-resistant boot assembly

Next, push the hard shell over the soft shell. This forms the weather seal around the cable.

Figure 6: Ethernet cable with weather-resistant boot assembled

Ensure that there are no gaps between the soft and hard shells on the smaller end and that the cable is
gripped securely by the soft shell.

Figure 7: Ethernet cable weather seal

2016.05.16 Adaptrum© 2016 P a g e 23 | 64
support@adaptrum.com All Rights Reserved Worldwide