Channel Selection - Adaptrum ACRS 2.0 Quick Start Manual

Adaptrum ACRS2.0 Quick Start Guide (International)

Channel Selection

Connect laptop to router (to internet) to BASE (thru PoE).
Ant.
INTERNET
Adaptrum
LAPTOP
GUI
PoE
#1
BASE
ROUTER
Ensure laptop wifi is disabled/disconnected; wait for "Ready" LED configuration
Restart AdaptrumTVBD
In the pop-up, pull down TVBD IP choices, select BASE unit, Connect
After GUI opens to Log tab, change to Database tab
Verify the unit is using the manual database:
In the Device & Channel pane, open the Channel Unset pull-down
Select any available channel for now. (You will be able to change this later after the spectrum scan.)
e.g. channel 21
This enables diagnostics to scan channels.
2016.05.16 Adaptrum© 2016 P a g e 13 | 64
support@adaptrum.com All Rights Reserved Worldwide