Figure 30: Gui Screenshot: Client Installation Tab; Table 12: Client Installation Field Descriptions - Adaptrum ACRS 2.0 Quick Start Manual

CLIENT
On the CLIENT, in addition to specifying unit name and IP address and performing (local) firmware
updates, MAC addresses may be added and/or removed from the Filter Table.

Figure 30: GUI screenshot: CLIENT Installation tab

# FIELD
1 System Notes
2 IP Address
-
3
Select
4
5 file path/name
6 message window
Update Firmware
7
Save & Reboot
8
9 MAC Address(s)
Add
10
11 Filter Table
Remove
12

Table 12: CLIENT Installation Field Descriptions

2016.05.16
support@adaptrum.com
Adaptrum ACRS2.0 Quick Start Guide (International)
user-entered unique unit name (highly recommended to fill this out)
default address cannot be changed
-
browser to navigate to desired firmware (aip) target file
name of selected file (must be a valid aip file)
displays messages after update button 7; wait for 'ok to reboot' message
initiates loading of selected file (field #5), messages display in field #6
saves all changes & causes unit to reboot (puts changes into effect)
pulls down all MAC addresses discovered on CLIENT network
adds MAC address (field #9) to filter list (field #11)
list of MAC addresses enabled for traffic through BASE
removes selected MAC address (highlighted in field #11)
Adaptrum©
All Rights Reserved Worldwide
DESCRIPTION
2016 P a g e 49 | 64