Disabling Wifi - Adaptrum ACRS 2.0 Quick Start Manual

Adaptrum ACRS2.0 Quick Start Guide (International)

Disabling WiFi

It is recommended to disable your wifi, as it may interfere with the Adaptrum setup process. Because
many laptops may be set to auto-re-enable wifi, it may be insufficient to simply "Disconnect," using the
pop-up shown below:
(Disconnect is insufficient)
To disable your wifi adapter, use the Control panel, Device Manager (red highlight).
Locate your wireless network adapter, right click to display pop-up, and select Disable
To re-enable wifi, repeat the steps above, but select Enable (which will appear on the last pop-up).
2016.05.16 Adaptrum© 2016 P a g e 33 | 64
support@adaptrum.com All Rights Reserved Worldwide