Diagnostics Tab; Figure 26: Gui Screenshot: Diagnostics Tab; Table 8: Diagnostics Field Descriptions - Adaptrum ACRS 2.0 Quick Start Manual

Diagnostics Tab

This tab is used to measure channel quality of either all or just the selected channels. The screenshot
below is an example of Measure All.

Figure 26: GUI screenshot: Diagnostics tab

# FIELD
1 Channel ID
2 Channel Quality
3 Channel List
4 Measure Available
5 Measure All

Table 8: Diagnostics Field Descriptions

Channel Quality is indicated numerically (lower numbers are better) and by color bars, interpreted as
follows:
Green
Yellow
Orange
Red
Channel Selection: When selecting a channel, chose the one with the best Channel Quality and, if
possible, with good quality adjacent channels as well.
2016.05.16
support@adaptrum.com
Adaptrum ACRS2.0 Quick Start Guide (International)
channel number
a measure of quality predicated upon Noise and Interference; lower is better
list of available channels constrained by Database tab field #9
initiate quality measurement of selected available channels (field #3)
initiate quality measurement of all channels
Good
Marginal
Avoid (NOT recommended)
Bad (do NOT use)
Adaptrum©
All Rights Reserved Worldwide
DESCRIPTION
2016 P a g e 45 | 64