Ethernet Cable; Figure 2: Acrs Bottom (Ethernet Rj45 Plug On The Right); Figure 3: Ethernet Weather-Resistant Boot; Figure 4: Ethernet Weather-Resistant Boot (Two Pieces) - Adaptrum ACRS 2.0 Quick Start Manual

Adaptrum ACRS2.0 Quick Start Guide (International)

Ethernet cable

The Ethernet cable is attached to the back of the radio unit with a weather-resistant boot, as shown in
Figure 2 and
Figure 3, below.

Figure 2: ACRS bottom (Ethernet RJ45 plug on the right)

Figure 3: Ethernet weather-resistant boot

The Ethernet weather-resistant boot comes in two pieces, as shown in Figure 4—a hard shell (on the
left) and a soft shell (on the right).

Figure 4: Ethernet weather-resistant boot (two pieces)

The soft shell has pre-cut slits in the small end to facilitate passing the Ethernet cable through, as shown
on the next page.
2016.05.16 Adaptrum© 2016 P a g e 22 | 64
support@adaptrum.com All Rights Reserved Worldwide