Installation Tab; Figure 29: Gui Screenshot: Base Installation Tab; Table 11: Base Installation Field Descriptions - Adaptrum ACRS 2.0 Quick Start Manual

Installation Tab

This tab allows the user to specify unit name and IP address, as well as to perform firmware updates.
BASE

Figure 29: GUI screenshot: BASE Installation tab

Note: Fields in gray font are reserved for Adaptrum diagnostic use.
# FIELD
1 System Notes
2 IP Address
3 Remote Server IP
4 Select
5 file path/name
6 message window
7 Update Firmware
8 Save & Reboot

Table 11: BASE Installation Field Descriptions

2016.05.16
support@adaptrum.com
Adaptrum ACRS2.0 Quick Start Guide (International)
user-entered unique unit name (highly recommended to fill this out)
user-entered IP address
reserved
browser to navigate to desired firmware (aip) target file
name of selected file (must be a valid aip file)
displays messages after update button 7; wait for 'ok to reboot' message
initiates loading of selected file (field #5), messages display in field #6
saves all changes & causes unit to reboot (puts changes into effect)
Adaptrum©
All Rights Reserved Worldwide
DESCRIPTION
2016 P a g e 48 | 64