Base; Setup - Adaptrum ACRS 2.0 Quick Start Manual

BASE

Setup

See Installing Software Appendix to install AdaptrumTVBD executable on laptop #1
Disable/disconnect laptop wifi (See
Setup apparatus for initialization: Connect cable from laptop to BASE (thru PoE)
Adaptrum
LAPTOP
TVBD GUI
#1
Wait for the "Ready" LED configuration (~30 seconds)...
Launch AdaptrumTVBD
Allow program to make changes
In the pop-up, if necessary, select an Ethernet Adapter...
BASE unit should appear in the pull-down list; (if it doesn't, ensure laptop wifi is disabled/disconnected
and LAN IP address is on the same subnet.)
Note: non-default TVBD appears as IP address + serial number (in parentheses)—first line in example above
Connect
2016.05.16
support@adaptrum.com
Adaptrum ACRS2.0 Quick Start Guide (International)
Disabling WiFi Appendix)
Adaptrum©
All Rights Reserved Worldwide
PoE
I O
...plus ~5 seconds
...then pull down TVBD IP choices
...select (auto-discovered) BASE unit
2016
BASE
P a g e 10 | 64