Crestron TPMC-9 Operation Manual page 25

Crestron TPMC-9
Operations Guide – DOC. 6965E
Swiping a finger on screen, left to right, right to left, top to bottom or bottom to top
lights the appropriate indicator, showing the swipe was recognized. Touch Return to
go back to the "Diagnostics" menu.
From the "Diagnostics" menu, touch Mic Test to display the "Diagnostics - Mic
Test" screen, as shown in the illustration below.
"Diagnostics – Mic Test" Screen
This screen performs a test of the TPMC-9's built-in microphone. The touch screen
records audio for five seconds and then plays back the recorded sound. Speak into
the microphone on the front of the TPMC-9 and the recording is played back to
confirm the microphone is functioning. When playback is finished, the display goes
back to the "Diagnostics" menu.
The Calibrate Touch button on the "Diagnostics" menu initiates touch screen
calibration, as does the Calibrate button on the Touch Test screen (refer to the
"Touch Test Screen" illustration on page 20).
From the "Diagnostics" menu, touch Return to go back to the main "Setup" menu.
About
From the main "Setup" menu, touch About to display the firmware version and
operating system image version currently loaded on the TPMC-9. Touch Return to
go back to the main "Setup" menu.
Save & Reboot
From the main "Setup" menu, touch Save & Reboot to save all settings, exit the
setup screens and return to the main project.
9" Tilt Touch Screen
9" Tilt Touch Screen: TPMC-9 • 21