Crestron TPMC-9 Operation Manual page 19

Crestron TPMC-9
Operations Guide – DOC. 6965E
Touch the IP Address / Hostname button. The on-screen keyboard opens, as shown
in the illustration below.
On-Screen Keyboard
Touch CLEAR to remove any previous entry. Then enter the address required.
Touch OK to accept the entry or CANCEL to cancel the entry. This hides the on-
screen keyboard and returns the display to the "Edit IP Table Entry" screen.
On the "Edit IP Table Entry" screen, touch Save to keep the change or Cancel to
cancel the change and return to the "Control System Interface" menu.
To edit the port, CIP ID or Device ID, touch the appropriate button. Touching the
Port (41794) button opens the numeric keypad. Touching the CIP ID or Device ID
buttons opens a hex keypad, shown in the illustration below.
Hex Keypad
Touch CLEAR to remove any previous entry. Then enter the ID required. Touch
OK to accept the entry or CANCEL to cancel the entry. This hides the hex keypad
and returns the display to the "Edit IP Table Entry" screen.
From the "Control System Interface" menu, to edit or remove an IP entry, first touch
the appropriate button containing the entry. Then touch Edit IP or Remove IP as
appropriate. Editing an entry displays the "Edit IP Table Entry" screen (refer to the
second illustration on page 14). Removing an entry displays a message saying Please
9" Tilt Touch Screen
9" Tilt Touch Screen: TPMC-9 • 15