Crestron TPMC-9 Operation Manual page 18

9" Tilt Touch Screen
14 • 9" Tilt Touch Screen: TPMC-9
IP Table
From the main "Setup" menu, touch IP Table to enter the "Control System
Interface" menu, shown in the illustration below.
"Control System Interface" Menu
The "Control System Interface" menu contains buttons for eight IP Table slots as
well as Add IP, Edit IP and Remove IP buttons to facilitate editing entries. Touch
the Auto Discovery Enabled button to toggle to Auto Discover Disabled. A
Control Connection indicator lights in green to show a control system connection.
Touch Cresnet to enter a Cresnet ID and to enable or disable Cresnet. (Refer to
"Cresnet" on page 18 for details.)
To add an IP entry to a blank slot, first touch one of the Empty IP Table Slot
buttons, then touch Add IP. The "Edit IP Table Entry" screen is displayed, as shown
below.
"Edit IP Table Entry" Screen
Crestron TPMC-9
Operations Guide – DOC. 6965E