Crestron TPMC-9 Operation Manual page 17

Crestron TPMC-9
Operations Guide – DOC. 6965E
Numeric Keypad
Touch CLEAR to remove any previous entry. Then enter the address required.
Touch OK to accept the entry or CANCEL to cancel the entry. This hides the
numeric keypad and returns the display to the "IP Address" screen.
On the "IP Address" screen, touch Save to keep the change or Cancel to cancel the
change and return to the "Ethernet Setup Menu".
To enter (or change) the Static Primary DNS, Static Secondary DNS, Static Primary
WINS or Static Secondary WINS, touch Edit DNS Servers >> on the "IP Address"
screen. The "IP Address" screen changes to show these addresses, as shown in the
illustration below.
"IP Address" Screen (Showing DNS and WINS Servers)
Touch the appropriate button for the address to be entered (or changed). The numeric
keypad opens.
Touch CLEAR to remove any previous entry. Then enter the address required.
Touch OK to accept the entry or CANCEL to cancel the entry. This hides the
numeric keypad and returns the display to the "IP Address" screen.
On the "IP Address" screen, touch Save to keep the change or Cancel to cancel the
change and return to the "Ethernet Setup Menu". Touch << Edit IP Address to
return to the previous "IP Address" screen.
9" Tilt Touch Screen
9" Tilt Touch Screen: TPMC-9 • 13