Crestron TPMC-9 Operation Manual page 16

9" Tilt Touch Screen
12 • 9" Tilt Touch Screen: TPMC-9
Ethernet
Touch Ethernet to enter the "Ethernet Setup Menu", shown in the illustration below.
"Ethernet Setup Menu"
The "Ethernet Setup Menu" displays information about the Link Status, Control
Connection, DHCP, MAC address, IP address, subnet, default gateway, primary
DNS and secondary DNS. It also has an IP Address Settings button used to access
the submenus for setting up IP address and DNS servers.
Touch IP Address Settings to enter the "IP Address" screen, shown in the
illustration below. Touch Return to go back to the main "Setup" menu.
"IP Address" Screen
DHCP is enabled by default. To enter a Static IP Address, Static Subnet Mask or
Static Default gateway, first touch the DHCP Enabled button. The button text
changes to Disabled. Then touch the appropriate button for the address to be entered
(or changed). A numeric keypad opens, as shown in the illustration that follows.
Crestron TPMC-9
Operations Guide – DOC. 6965E