Settings You Can Configure When Ipsec Is Available/Unavailable - Ricoh AFICIO MP C305SP Manual

Category
Security User Lockout Release Timer
Lockout Policy
Security User Lock Out User for
Lockout Policy
Network SNMPv3 Function
SNMPv3
Security FTP
Network Security
Security S/MIME
Address Book User Certificate
Email
• The administrator must indicate which strength level is to be specified for the encryption algorithm.
• For details about specifying an encryption algorithm and registering a user certificate, see p.138
"Configuring S/MIME".

Settings You Can Configure When IPsec Is Available/Unavailable

All communication to and from machines on which IPsec is enabled is encrypted.
If your network supports IPsec, we recommend you enable it.
Item
Set to [Active] or [Inactive].
When setting to [Active], set the Lockout release
timer to 60 minutes or more.
For details, see p.69 "User Lockout Function".
When setting "Lockout Release Timer" to [Active],
set the Lockout release timer to 60 minutes or
more.
For details, see p.69 "User Lockout Function".
Inactive
To use SNMPv3 functions, set "SNMPv3
Function" to [Active], and set "Permit SNMPv3
Communication" to [Encryption Only]. Because
SNMPv3 enforces authentication for each
packet, Login log will be disabled as long as
SNMPv3 is active.
Inactive
Before specifying this setting, set "Network
Security Level" to [Level 2] on the control panel.
"Encryption Algorithm": AES-128 bit, AES-256
bit, or 3DES-168 bit
You must register the user certificate in order to
use S/MIME.
You must register the user certificate in order to
use S/MIME.
Additional Information for Enhanced Security
Setting
273