Ricoh AFICIO MP C305SP Manual page 250

Message
"Some invalid destination(s)
contained. Do you want to
select only valid
destination(s)?"
"Some of selected files are
currently in use. They could
not be deleted."
"Some page(s) are almost
blank. To cancel press the
Stop key."
"The entered file name
contains invalid character(s).
Enter the file name again
using any of the following 1
byte characters. " 0 to 9 ", "
A to Z ", " a to z ", " . - _""
"The number of destinations
that can be entered
manually at the same time is
as shown above."
Causes
The specified group contains
e-mail destinations and Scan
to Folder destinations, either
of which are incompatible
with the specified
transmission method.
You cannot delete a file
which is waiting to be
transmitted ("Waiting to
send data..." status
displayed) or whose
information is being
changed with
DeskTopBinder.
The first page of the
document is almost blank.
The file name contains a
character that cannot be
used.
The e-mail has too many
destinations.
When Messages Are Displayed on the Control Panel
Solutions
In the message that appears at each
transmission, press [Select].
Cancel transmission ("Waiting to send
data..." status cleared) or the
DeskTopBinder setting, and then delete
the file.
The original's blank side might have
been scanned. Be sure to place your
originals correctly.
• Check the file name specified at
the time of scanning. For details
about characters that can be used
in file names, see "Available
Characters and How to Enter
Them", Getting Started
• Check the file name specified at
the time of scanning. The file
name specified in the Sending
Scan Files to Folders function
cannot contain the following
characters:
\ / : * ? " < > |
The file name cannot start or end
with a period ".".
Split the destinations into two or more
groups.
.
195