Bosch AutoDome Junior HD VJR Series Operation Manual page 26

26 en | Installing a Wall Mount
Figure 5.5: Connect Cables
1.
2.
2014.11 | 6.1 | F.01U.275.803
Align wires on side of mounting plate with crescent shaped cut-out.
Attach the camera to the mounting plate by inserting the vertical tab on the plate (item 1,
below) into the recessed slot on the top of the camera dome (Item 3) to the right of the
safety locking screw (item 2).
Note: Do not loosen the three brass buttons (item 4). These brass buttons engage the
slotted tabs (item 5) on the mounting plate.
Operation Manual
AutoDome Junior HD Series
Bosch Security Systems, Inc.