Advanced Mode: General; Identification; Password - Bosch AutoDome Junior HD VJR Series Operation Manual

AutoDome Junior HD Series
12.8

Advanced Mode: General

12.9

Identification

Camera ID
Each AutoDome Junior HD should be assigned a unique identifier that you can enter here as
an additional means of identification.
Camera Name
The camera name makes it easier to identify the remote camera location, in the event of an
alarm for example. It will be displayed in the video screen if configured to do so. The camera
name makes the task of administering cameras in larger video monitoring systems easier, for
example using the VIDOS or Bosch Video Management Systems program.
Enter a unique, unambiguous name for the camera in this field. You can use both lines for this.
Caution!
Do not use any special characters, for example &, in the name.
!
Special characters are not supported by the system's internal recording management and may
therefore result in the Player or Archive Player being unable to play back the recording.
You can use the second line for entering additional characters; these can be selected from a
table.
1.
2.
3.
4.
5.
Initiator extension
You can attach your own text to the initiator name of the AutoDome Junior HD to make the
unit easier to identify in large iSCSI systems. This text is added to the initiator name,
separated from it by a full stop. You can see the initiator name in the System Overview page.
12.10

Password

An AutoDome Junior HD is generally protected by a password to prevent unauthorized access
to the unit. You can use different authorization levels to limit access.
Notice!
Proper password protection is only guaranteed when all higher authorization levels are also
protected with a password. If a live password is assigned, for example, a service and a user
password must also be set. When assigning passwords, you should therefore always start
from the highest authorization level, service, and use different passwords.
Password
The AutoDome Junior HD operates with three authorization levels: service, user and live.
The highest authorization level is service. After entering the correct password, you can access
all the functions of the AutoDome Junior HD and change all configuration settings.
With the user authorization level, you can operate the unit and also control cameras, for
example, but you cannot change the configuration.
Bosch Security Systems, Inc.
Click the icon next to the second line. A new window with the character map is opened.
Click the required character. The character is inserted into the Result field.
In the character map, click the << and >> icons to move between the different pages of
the table, or select a page from the list field.
Click the < icon to the right of the Result field to delete the last character, or click the X
icon to delete all characters.
Now click the OK button to apply the selected characters to the second line of the
Camera 1 parameters. The window will close.
Operation Manual
Configuring the AutoDome Junior HD | en
2014.11 | 6.1 | F.01U.275.803
65