Bosch AutoDome Junior HD VJR Series Operation Manual page 73

AutoDome Junior HD Series
–
–
To select the stream options:
1.
2.
3.
Property
Select one of the H.264 standards for each stream.
Notice!
If you select H.264 MP 720p30/60 Fixed or H.264 MP 1080p Fixed as the first stream, you can
select only Copy of Stream 1 as an option for stream 2.
Default profile
Select one of the following profiles for each stream:
–
–
–
–
–
–
–
–
Refer to Encoder Profile, page 70, for more details about each stream.
Preview
Click the Preview button to open a small static preview window for each stream. To enlarge
the preview and view live video, click the 1:1 Live View button.
JPEG stream
Select the resolution, frame rate, and image quality parameters for the M-JPEG stream.
–
–
–
Bosch Security Systems, Inc.
H.264 BP+ bit-rate-limited
Select this setting when using hardware decoders or the Divar XF digital video recorder.
The bit rate is limited to 1.2 Mbps.
CABAC: off
CAVLC: on
GOP structure: IP
I-frame distance: 15
Deblocking filter: on
H.264 MP SD
Select this setting when using software decoders, PTZ and for rapid movements in the
images.
CABAC: on
CAVLC: off
GOP structure: IP
I-frame distance: 30
Deblocking filter: on
Select the required encoder properties and one of the encoder profiles for each data
stream.
Click the Preview button. The preview screens for both data streams are shown.
Click the 1:1 Live View button below the preview screen to open a new window with the
original data stream and to check the image quality and the transmission rate.
HD high quality / low latency
High resolution 2
Low bandwidth
DSL
ISDN (2B)
ISDN (1B)
Modem
GSM
Resoltuion: Select either 4CIF/D1 or CIF.
Frame rate: Select one of the following frame rates: 5, 10, 15, 20, 25, or 30 ips.
Picture quality: his setting allows you to adjust the image quality. Use the slide bar to
choose a quality between Low and High.
Operation Manual
Configuring the AutoDome Junior HD | en
2014.11 | 6.1 | F.01U.275.803
73