Product Checking And Parts Identification - Mitsubishi Electric FR-D700 Installation Manuallines

1 PRODUCT CHECKING AND PARTS IDENTIFICATION

Unpack the inverter and check the capacity plate on the front cover and the rating plate on the inverter side face to ensure that
the product agrees with your order and the inverter is intact.
Inverter type
-
FR
Symbol Voltage class
Three-phase 400V
D740
class
Single-phase 200V
D720S
class
Installation of the inverter
Enclosure surface mounting
Remove the front cover and wiring cover to fix the inverter to the surface.
FR-D740-012 to 160
FR-D720S-070 and 100
Front cover
Note
When encasing multiple inverters, install them in parallel as a
cooling measure.
When using the inverters at the surrounding air temperature of
40°C or less, the inverters can be installed without any clearance
between them (0cm clearance). When surrounding air
temperature exceeds 40°C, clearances between the inverters
should be 1cm or more (5cm or more for the FR-D740-120 or
more).
Install the inverter vertically.
- - EC
D740 036
Displays the
rated current
Wiring cover
Capacity plate
FR-D740-036-EC
Capacity plate
Inverter type
Rating plate
Rating plate
Inverter type
Input rating
Output rating
Serial number
FR-D720S-008 to 042
Front cover
10cm or more
10cm or more
Serial number
FR-D740-036-EC
Wiring cover
1