Access Point Placement; Ap6562 Hardware Mouting And Installation; Mounting Bracket Kit - Motorola AP6562 Installation Manual

Hide thumbs Also See for AP6562:

Table of Contents

2.2 Access Point Placement

For optimal performance, install the access point away from transformers, heavy-duty motors, fluorescent lights,

microwave ovens, refrigerators and other industrial equipment. Signal loss can occur when metal, concrete, walls

or floors block transmission. Install the access point in an open area or add access points as needed to improve

coverage.

Place the access point using the following guidelines:

• Orient the access point antennas vertically for best reception (applies to external antenna models only).

• When deploying outdoor mesh networks using a pole mounted installation, install the access point at an

ideal height of 30 to 35 feet from the ground.

To maximize the access point's radio coverage area, Motorola Solutions recommends conducting a site survey to

define and document radio interference obstacles before installing the access point.

2.3 AP6562 Hardware Mounting and Installation

It is recommended to use the AP6562 mounting bracket kit (KT-147407-01) for most deployments. When a standoff

distance is required for a pole mounted or wall mounted installation, use the extension arm kit (KT-150173-01).

The AP6562 mounting bracket kit (KT-147407-01) includes the access point bracket (left), angle adapter bracket

(center), and pole mount bracket (right) sections:

The access point bracket and the angle adapter bracket can rotated (plus or minus 15 degrees) and tilted (up to 45

degrees) to achieve the required angle and rotation.

AP6562 Access Point

Table of Contents