Motorola AP6562 Installation Manual page 20

20
NOTE
The labels for Radio 1-0, Radio 1-1, Radio 2-0 and Radio 2-1 are molded into the AP6562 access point enclosure
beside the antenna connectors. When mounting antennas to the connectors, ensure that you have selected the
appropriate band for the configured radio. Radio 1 is a 2.4 GHz radio.
Motorola Solutions offers three antenna suites to support 2.4 GHz band, 5 GHz band, and dual band options. Select
an antenna model best suited to the intended operational environment of your access point.
The 2.4 GHz antenna suite includes the following models:
Part Number
ML-2499-HPA8-01
ML-2499-HPA4-01
ML-2499-HPA3-01R
The 5 GHz antenna suite includes the following models:
Part Number
ML-5299-HPA5-01
ML-5299-FHPA6-01
The dual band antenna suite includes the following model:
Part Number
ML-2452-HPAG5A8-01
NOTE
For up-to-date information on supported antennas and antenna specifications, please refer to the Motorola
Solutions Enterprise Wireless LAN Antenna Specification Guide available on the Motorola Solutions Web site. For
more information, refer to http://supportcentral.motorola.com/support/product/manuals.do.
If an antenna connector is unused, the open connector must be covered with an
appropriate threaded metal or plastic antenna connector cover.
Antenna Type
Outdoor rated dipole antenna; N-Male Connector 8
Outdoor rated dipole antenna; N-Male Connector 4
Outdoor rated dipole antenna; N-Male Connector 8
Antenna Type
Outdoor rated dipole antenna; N-Male Connector 5
Outdoor rated dipole antenna; N-Male Connector 8
Antenna Type
Outdoor rated dipole antenna; N-Male Connector 5
Dual band antennas should only be used on Radio 2-0 and Radio 2-1 connectors.
AP6562 Access Point
Maximum Gain
Maximum Gain
Maximum Gain