Basic Printing; Loading Paper In Tray 1 (Mpt) - Xerox Phaser 7750 Reference Manual

Basic Printing

This topic includes:
■ "Loading Paper in Tray 1 (MPT)" on page 2-11
■ "Loading Paper in Trays 2-5" on page 2-16
■ "Using the Stapler" on page 2-24
■ "Factors Affecting Printer Performance" on page 2-29
Follow these steps to print jobs:
1. Load paper in the tray.
2. Adjust the tray guides.
3. If prompted by the front panel, confirm the paper type and/or size and change it as
required.
4. Select File/Print to adjust the printing options in the printer driver. For more information
go to Reference/Printing/Adjusting Printing Options
ROM.
5. Send the job to the printer from the application's Print dialog box.

Loading Paper in Tray 1 (MPT)

All paper types can be used in Tray 1 (MPT).
Caution
If you change the type of paper in a tray,
you must change the paper type on the
front panel to match the paper that you
loaded. If you fail to do this, print-
quality problems can occur and the
fuser can be damaged.
For more information on paper types, weights, and sizes, go to
Papers on the User Documentation CD-ROM.
Copyright © 2004 Xerox Corporation. All Rights Reserved.
Phaser® 7750 Color Laser Printer
on the User Documentation CD-
P h a s e r 7 7 5 0
Reference/Printing/Supported
2-11
7750-037