Multiple Stations - Panasonic KX-FPC141 Operating Instructions Manual

Multiple stations

This feature is useful for sending the same document to selected parties whose telephone numbers are stored
in the One-Touch Dial or JOG DIAL directory. You must program the desired parties into one of the
BROADCAST keys (One-Touch Dial keys 1, 2 or 3).
Important:
Before programming, make sure that the desired telephone numbers have been stored into the One-Touch
Dial or JOG DIAL directory.
The BROADCAST keys can be used as One-Touch Dial keys 1, 2 or 3 or as broadcast keys.
These functions cannot be used at the same time.
Programming the BROADCAST keys with telephone numbers
1
Press DIRECTORY PROGRAM
Display:
2
Press one of the BROADCAST
3
Press or to select "BROADCAST".
Example:
4
Press START/SET/COPY
5
Enter the station.
a: Using the One-Touch Dial:
For stations 1–3 which are not used as
BROADCAST keys, press the preset
One-Touch Dial key.
For stations 4–6, press
the preset One-Touch Dial key.
Example:
b: Using the JOG DIAL directory:
Rotate JOG DIAL
displayed.
Example:
Press START/SET/COPY
Example:
To enter other stations, repeat this step (up to
20 stations).
.
PRESS STATION
OR USE JOG-DIAL
keys.
DIAL MODE
BROADCAST 1
.
DIR= [000]
LOWER , then press
DIR=Margy [001]
until the desired name is
Glen [001]
.
DIR=Glen [002]
Sending Faxes
6
Press START/SET/COPY
all of the desired stations.
PRESS STATION
OR USE JOG-DIAL
To program another BROADCAST key,
repeat steps 2 to 6.
7 DIRECTORY PROGRAM
Press
the program.
BROADCAST
/
One-Touch Dial keys
1 2 3
4 5 6
7 8 9
0
STOP
START/SET/COPY
DIRECTORY PROGRAM
Note:
If you make a mistake while programming,
press STOP , then make the correction.
Confirm the stored numbers by printing a
broadcast list (p. 134).
after entering
REGISTERED
to exit
/
JOG DIAL
LOWER
71