If A Power Failure Occurs; Receive Mode - Panasonic KX-FT25HG Operating Instructions Manual

Operations

Receive mode

Problem
I cannot select the desired
receive mode.
Copying
Problem
The unit does not make a copy.
A dirty pattern or a black line
appears on the copied document.
The copied image is distorted.
The copied document is blank.
Answering device
Problem
No voice messages have been
recorded in the TAD/FAX mode.
I cannot retrieve recorded
messages from a remote
telephone.
If a power failure
The unit will not function.
Voice and fax calls will be interrupted.
If delayed transmission is programmed and the start time has passed during a power failure,
transmission will be attempted soon after power is restored.
80
If you want to set the TAD/FAX, FAX ONLY or TEL/FAX
mode:
— Select the desired mode using feature #05 (p. 45), and
— Press RECEIVE MODE
mode is displayed.
If you want to set the TEL mode:
— Press RECEIVE MODE
mode is displayed.
You cannot make a copy during programming. Make the
copy after programming or stop the programming.
The glass or rollers are dirty. Clean them (p. 84).
The thermal head is dirty. Clean it (p. 85).
The recording paper roll is installed incorrectly. Make sure
that the shiny side of the paper is facing down and
re-install the paper (p. 21).
The memory is full. Erase some or all of the messages
(p. 62, 68).
Make sure that you use the remote operation ID correctly
(p. 66).
occurs!
Cause & Remedy
repeatedly until the desired
repeatedly until the TEL
Cause & Remedy
Cause & Remedy