Completing The Next Steps Screen - HP Hyper Converged 380 Installation Manual

If you need to make changes, go back using the links in the left navigation pane.
When you are ready to proceed, click Deploy.
2.
Be aware that if you are deploying multiple systems, the time to complete deployment increases.
IMPORTANT: Do not close OneView InstantOn during the deployment process. If the
deployment does not complete or hangs, see "Troubleshooting (on page 73)."
When the deployment is complete, the Next Steps screen appears.

Completing the Next Steps screen

On the Next Steps screen, start the process of applying licenses. To view help documentation and
complete the installation with fully licensed VSAs, you must have internet access.
VMware software
The VMware vSphere license that ships with each HC380 node is a trial license that is valid for 60 days
from the date on which the node ships from the factory. Apply a purchased license before the trial license
expires, or restrictions will occur.
To apply your license for each of the ESXi nodes, use the following steps.
Launch vCenter using the link Launch vCenter Web Client under the section License VMware
1.
software.
Log in using your vCenter credentials. Use vCenter credentials only; do not use a Windows account.
2.
For local vCenter, use the default credentials:
user name: administrator@vsphere.local
o
password: HyperConv!234
o
Configuring the system 43