HP Hyper Converged 380 Installation Manual page 66

Click Next.
7.
On the Credentials screen, enter your existing StoreVirtual credentials, and then click Next.
On the Review Configuration screen, ensure the information that you entered is correct. If you need
8.
to make changes, go back using the links in the left navigation pane. When you proceed, click
Deploy. Be aware that if you are deploying multiple systems, the time to complete deployment
increases.
IMPORTANT: Do not close OneView InstantOn during the deployment process. If the
deployment does not complete, see "Troubleshooting (on page 73)."
Expanding the system 66