HP Hyper Converged 380 Installation Manual page 90

t_Create the public keys on the switch2_Phoenix
From system-view, run the following commands.
public-key local create rsa
Input the modulus length [default = 1024]:Enter
public-key local create dsa
Input the modulus length [default = 1024]:Enter
public-key local create ecdsa secp256r1
SSH to the switch using <<net_switch1_mgmt_ip>>, username admin and the password
<<net_switch_admin_password>>.
Configure NTP
Configure NTP on the switch. From system-view, run the following commands.
system-view
clock protocol none
return
clock datetime 05:58:00 05/21/2015
system-view
ntp-service unicast-server <<mgmt_net_ntp1>> priority
clock protocol ntp
save
Add individual port descriptions for troubleshooting
To add individual port descriptions for troubleshooting activity and verification, from system-view, run the
following commands.
interface Ten-GigabitEthernet 1/0/1
description HC380-node1-FLEXLom-1
quit
interface Ten-GigabitEthernet 1/0/2
description HC380-node2-FLEXLom-1
quit
interface Ten-GigabitEthernet 1/0/3
description HC380-node3-FLEXLom-1
quit
interface Ten-GigabitEthernet 2/0/1
description HC380-node1-FLEXLom-1
quit
interface Ten-GigabitEthernet 2/0/2
description HC380-node2-FLEXLom-2
quit
interface Ten-GigabitEthernet 2/0/3
description HC380-node3-FLEXLom-3
quit
interface FortyGigE 1/0/51
description Switch1-IRF-Switch2-IRF-2/0/51
quit
interface FortyGigE 1/0/52
Appendix A: Network switch configuration 90