Rear Panel - EverFocus PARAGON FHD 16x4 User Manual

1.7 Rear Panel

1
2
6
No
Name
1 Power Port
2 Power Switch
3 Alarm Input /Out
4 Audio Input 1~16
Loop Video Output
5
1~16
6 eSATA Port
7 Video Input 1~16
3
7
Description
Connects to the 100-240 VAC~ power using the supplied Power Cord.
Press to turn on or off the power.
Connects up to 16 alarm inputs and 4 alarm outputs devices. You can
also connect to the radio-controlled clock for time synchronization.
Please refer to 2.3.2 Alarm I/O.
Connects to the audio input devices such as microphones using the
supplied Audio Cable. Note that the microphone with a (built-in)
amplifier and external power supply is required.
You can also optionally connect the monitors to each Loop Video
Output to display the video of the corresponding channel. Please
refer to 2.3.1 Monitor Connection.
Connects to an external eSATA storage device.
Connects to analog HD / SD cameras using coaxial cables.
Note:
1. The DVR can automatically configure itself as NTSC or PAL. To
do this, connect a camera to any channel of the DVR. The DVR
will detect the first connected camera format (NTSC or PAL) and
then automatically configure itself to the detected format from
the first connected camera. For example, if the format of the
first connected camera is NTSC, the DVR will configure itself to
NTSC format.
2. All video inputs are compatible with all resolution types of
cameras, such as 1080p, 720p, 960H and D1 cameras (HD-TVI /
HD-CVI / HD-SDI cameras are not supported).
10
4
8 9
10 11
PARAGON FHD 16x4
5
12 13 14