Basic Connection - EverFocus PARAGON FHD 16x4 User Manual

2.3 Basic Connection

The instructions below the figure describe the basic connection for the PARAGON FHD 16x4.
1
Power Supply
1. Using the supplied Power Cord, connect one end to the
the other end to the
Note: Please ensure to connect the internal power cables to the internal HDDs before
powering on the DVR.
2. Connect the line level audio input devices to the DVR using the supplied Audio Cable. Note
that the audio input devices, such as microphones, are required to have a (built-in) amplifier and
external power supply.
3. Optionally connect a mouse to the DVR to control the system. You can also control the
system using the supplied IR Remote Control or the control keys on the front panel.
4. Connect the cameras to the DVR using the coaxial cables. EverFocus eZ.HD cameras are
recommended. (HD-TVI / HD-CVI / HD-SDI cameras are not supported)
5. To listen to audio of video source, connect speakers to the Audio Out port. Note that speaker
with a (built-in) amplifier and external power are required.
6. To view videos, connect a monitor to the HDMI port using the HDMI cable supplied by the
monitor manufacturer.
7. Use a standard RJ-45 cable to connect the DVR to the network for remote viewing or using
EverFocus surveillance system (Genie XMS).
4 5
Line Level
Camera 1~16
Audio Out
100-240 VAC~ power outlet.
Line Level
2
Audio In 1~16
6
Main Monitor
(HDMI)
100-240 VAC~
16
PARAGON FHD 16x4
3
Mouse
7
Network
Web Remote CMS:
Client Genie XMS
port on the DVR and