Connecting The Telephone; Dect; Registering Dect Handset - TP-Link Archer VR600v User Manual

Chapter 5
5 1

Connecting the Telephone

Connect your telephone to the TAE ports on the side panel or RJ11 ports on the back
panel. Please note that you can only connect to two ports (one to a FON 1 and the other
to a FON 2) at most.
FO
N 1
FO N 2
TAE
5 2

DECT

The modem router is integrated with DECT (Digital Enhanced Cordless
Telecommunications) function. With this function enabled, you can register your
cordless phone on the modem router and make calls via Internet.
5 2 1

Registering DECT Handset

There are two ways to register your DECT handset.
Method 1: Via DECT Button
1 Set your DECT handse in the registration mode, and then press and hold the DECT
button on the DSL router for about 3 seconds until the Phone LED
RJ-11
DECT
Po
we
r On /Of
f
Re
set
WP
Within 1 minute
S
WL AN
DE
CT
Press for 3 seconds
DECT
VoIP
flashes.
Blinking
19