TP-Link Archer VR600v User Manual page 107

Chapter 12
8 ) Enter the Pre-Shared Key
keep Perfect Forward Secrecy
Note:
Make sure Site A and Site B use the same key.
9 ) Leave the Advanced
OK to save.
3 Configuration on Site B (remote network). Refer to step 2
configuration on Site A and make sure that Site A and Site B
use the same pre-shared keys
settings.
4 The Status column will change to
has been set up successfully.
5 Check the VPN connection. You can ping site B' LAN IP
from your computer in site A to verify that the IPSec VPN
connection is set up correctly.
Tips: To check the VPN connection, you can do the following.
1. On the host in Site A, press
"cmd" and hit OK.
2. In the CLI window, type in "ping 192.168.2.x" ("192.168.2.x" can be IP address of
any host in Site B). Then press [Enter].
Specify Your Network Settings
for IKE authentication. Then
enabled.
Settings as default value. Then click
and Perfect Forward Secrecy
UP if the VPN connection
[Windows Logo] + [R] to open Run dialog. Input
102