Set Up The Ipv6 Tunnel; Use The Public Ipv6 Tunnel Service-6To4 - TP-Link Archer VR600v User Manual

Chapter 12
Done!
Note:
1. The product supports a maximum of ten simultaneous connections.
2. If one of the site has been offline for a while, for example, if Site A has been disconnected, on Site B you need to
click Disable and then click
12 8

Set Up the IPv6 Tunnel

The IPv6 Tunnel feature helps you obtain IPv6 resources based on an IPv4 WAN
connection or vice versa.
IPv6 Tunnel is a transition mechanism that enables IPv6-only hosts to reach IPv4
services or vice versa and allows isolated IPv6 hosts and networks to reach each other
over IPv4-only infrastructure before IPv6 completely supplants IPv4. It is a temporary
solution for networks that do not support native dual-stack, where both IPv6 and IPv4
run independently.
The modem router provides three tunneling mechanisms: 6to4,
way to set up 6rd and DS-Lite tunnel are similar.
12 8 1

Use the Public IPv6 Tunnel Service-6to4

The 6to4 tunnel is a kind of public service. If there is any 6to4 server in your network,
you can use this mechanism to access IPv6 service. If your ISP provides you with an
IPv4-only connection but you want to visit IPv6 websites, you can try to set up a 6to4
tunnel.
I want to:
3. If Ping proceeds successfully (gets replies from host in Site B), the IPSec
connection is working properly now.
Now IPSec VPN is implemented to establish a connection.
Enable after Site A back on line in order to re-establish the IPSec tunnel.
Set up the IPv6 tunnel though my ISP doesn't provide me with
the tunnel service.
Specify Your Network Settings
6rd and DS-Lite. The
103