Table of Contents
Advertisement
Chapter 6
6 1
Connecting the Telephone
Connect your telephone to the TAE ports on the side panel or RJ11 ports on the
rearpanel. Please note that you can only connect to two ports (one to a Phone 1 and
the other to a Phone 2) at most.
6 2
Entering Telephone Information
Before using telephony services, you should first enter your telephone information
provided by your telephony service provider.
Follow the steps below to enter information:
1
Visit
http://tplinkwifi.net
for the router.
2
Go to
Advanced
Click
Add
and you will see the following screen.
3
Enter the necessary information as required, and click
effective.
Phone Number:
The number you use to dial and answer.
Registrar Address:
Usually a domain name, if not, an IP address.
Authentication ID
and
Advanced:
Click to have more configuration.
To have more configuration on telephony settings
Click
Advanced
under
or http://192.168.0.1, and log in with the password you set
>
Telephony
>
Telephone Number
Password:
Not necessary information, but if you have, fill them in.
Advanced Settings
to open the configuration page.
OK
to configure more telephony settings.
VoIP
to make the settings
51
Advertisement
Table of Contents
