Advertisement
Quick Links
TP-Link AC 1200 Archer VR500vd
Installation Guide
AC1200 Wireless Dual Band Gigabit VoIP VDSL/ADSL Modem Router
1. Connect your computer to the router via a wired or wireless connection.
2.
A
Launch a web browser and type in
192.168.1.1.
B
Create a password (1-15 characters) and get started.
C
Follow the step-by-step instructions to set up an internet connection
Go to page 2
FTTP/FTTC/HFC
http://tplinkmodem.net
or
Advertisement
Related Manuals for TP-Link Archer VR500vd
Summary of Contents for TP-Link Archer VR500vd
- Page 1 TP-Link AC 1200 Archer VR500vd FTTP/FTTC/HFC Installation Guide AC1200 Wireless Dual Band Gigabit VoIP VDSL/ADSL Modem Router 1. Connect your computer to the router via a wired or wireless connection. Launch a web browser and type in http://tplinkmodem.net 192.168.1.1. Create a password (1-15 characters) and get started.
- Page 2 Step 1 Step 1 Select your Region and Time Zone. Tap on Advanced. Continue to Step 2.
- Page 3 Step 2 Step 2 Tap on Network > Tap on DSL Internet. Tap on Delete All. (This is to ensure there are no conflicting connection) Continue to Step 3.
- Page 4 Step 3 Step 3 Tap on Network > Tap on ETH Internet. Tap on Delete All. (This is to ensure there are no conflicting connection) Continue to Step 4.
- Page 5 Step 4 Step 4 Tap on ETH Internet > Tap on Add Continue to Step 5.
- Page 6 Step 5 Step 5 Internet Connection Type = PPPoE Username = username@wba.fibremax.com.au (Username provided by Fibremax) Password = Password (Password provided by Fibremax) Connection Mode = Auto IPv4 = Enable Continue to Step 6. Connection Mode...
- Page 7 Step 6 Step 6 Tap on OK. The Modem should be configured and connect to the internet. It’s recommended to reboot the Modem. Finished...
Need help?
Do you have a question about the Archer VR500vd and is the answer not in the manual?
Questions and answers