Configuring Dect Settings - TP-Link Archer VR600v User Manual

Chapter 5
2 Enter the PIN (Default: 0000) on the DECT handset if required.
Notes:
1. Up to six DECT handsets can be registered on the modem router.
2. If you press the DECT button for more than 4 seconds, and the Phone LED still does not light, release the button
and try again.
Method 2: Via Web Management Interface
Follow the steps below to register:
1
Visit http://tplinkmodem.net, and log in with the password you set for the router.
2
Go to Advanced
3 Click Register New DECT Handset
your DECT handset.
5 2 2

Configuring DECT Settings

Configure DECT settings on the web management page of the modem router.
Follow the steps below to configure:
1 Visit http://tplinkmodem.net, and log in with the password you set for the router.
2 Go to Advanced
> VoIP > Telephony Devices
and follow instructions on the page to register
> VoIP > DECT, and you will see the following screen.
to open the registration page.
VoIP
20