Entering Telephone Information - TP-Link Archer VR600v User Manual

Chapter 5
3 Enable DECT.
4
The PIN code is needed when registering your cordless phone. The default is 0000.
Change it by entering a new one.
5 Reduce DECT field strength:
base transmit power will be decreased. Then the DECT Handset will have signal
within a small distance.
6
Eco DECT: Only when all handsets support Eco Mode, will it take effect. In this
mode, if all the handsets standby for more than one minutes, DECT Base and
DECT Handsets would be in Eco Mode and do not emit any signal. It will wake up
automatically when there is a call.
7
Security: Check the box if you want the DECT/CAT-iq encrypt security to take effect.
8 Click Save to make the settings effective.
5 3

Entering Telephone Information

Before using telephony services, you should first enter your telephone information
provided by your telephony service provider.
Follow the steps below to enter information:
1
Visit http://tplinkmodem.net, and log in with the password you set for the router.
2
Go to Advanced
Check the box to enable this function. In this mode,
> VoIP > Telephone Numbers to open the configuration page.
VoIP
21