TP-Link Archer VR600v User Manual page 61

Chapter 8
2 Enable Authentication for Data Security
It is strongly recommended that you set and apply a sharing account for data
security.
1 ) Visit http://tplinkmodem.net, then log in with the password you set for the
modem router.
2 ) Select Advanced
3 ) Choose to use the default Account (admin) or use a new account and click Save.
Note:
For Windows users, do not set the sharing username the same as the Windows username. Otherwise,
Windows credential mechanism may cause the following problems:
• If the sharing password is also the same as the Windows password, authentication will not work since
the Windows will automatically use its account information for USB access.
• If the sharing password is different from the Windows password, the Windows will be unable to
remember your credentials and you will always be required to enter the sharing password for USB
access.
4 ) Enable Authentication
• If you leave Share All
folders.
• If Share All is disabled, enable
> USB Settings > Sharing
to apply the sharing account.
enabled, click the button to enable
Authentication
Access.
Authentication
for specific folders.
USB Settings
for all
56