TP-Link Archer VR600v Installation Manual
Adsl
Hide thumbs
Also See for Archer VR600v:
- User manual (131 pages) ,
- User manual (145 pages) ,
- Installation manual (9 pages)
Advertisement
Quick Links
Advertisement
Related Manuals for TP-Link Archer VR600v
Summary of Contents for TP-Link Archer VR600v
-
Page 2: Support And Warranty
UFB 2 x VOIP phone ports 3 x 10/100/1000 LAN ports 1 x USB port 1 x 10/100/1000 WAN/LAN port SUPPORT & WARRANTY 3 Years Manufacturer’s Warranty Website: http://www.tp-link.com/support Email: support.au@tp-link.com 24/7 Helpline: 0800 875 465... -
Page 3: Getting Started
GETTING STARTED This quick start setup guide is to help you get up and running on your new Unlimited Internet connection. Before you start please check you have the following items:... - Page 4 INSTALLING YOUR NEW TP-LINK VR600v WIRELESS ROUTER Step 1: Open your box and pull out the modem. Make sure you have your username and password, we sent to you via email handy as you will need this when you reach step 9.
-
Page 5: Logging Into Your Router
Connect to the Wi-Fi Network name (SSID) as printed on the bottom of the modem as well as your TP-Link Wi-Fi card It should be similar to : “TP-Link_xxxx”. The default Wi-Fi password is also printed at the bottom of the modem and on the wifi card as well. -
Page 6: Configuring Your Router
CONFIGURING YOUR ROUTER Once you have logged into your modem following the “Logging into your Router” instructions, you can now begin to configure your router. Step 7: Follow the quick setup guide and select time zone and the click “Next” Step 8: Now from the ISP List select “Others”... - Page 7 Step 9: You will now arrive at the Internet Setup page. Ensure Settings are as below: L2 Interface Type: VDSL VLAN: Enabled VLAN ID: 10 Internet Connection Type: PPPoE Username: (enter your PPP Username here) Password: (enter your PPP Password here) Step 10: Once you have entered the correct details click...
- Page 8 Step 11: You will now reach the Wireless Settings page where you will be able to configure your Wi-Fi Network. The default values will be the same as those printed on the back of your router and on the Wi-Fi card provided. Here you can enable or disable, one or both of, the wireless bands as well as change your wireless Network Name (SSID) and Password for each band to your desired name(s) and password(s).
- Page 9 Step 13: Congratulations! You are successfully connected to the internet and Wi-Fi is now secured. You can now connect to your Wi-Fi devices using the details you have just configured.
- Page 10 Contact Information Phone : 09 973 0546 Monday - Saturday: 10am - 6pm Email: support@unlimitedinternet.co.nz facebook.com/unlimitedinternet www.unlimitedinternet.co.nz...