Ipv6 Lan Settings; Configure The Radvd Address Type - TP-Link Archer VR600v User Manual

Chapter 12
permanent IP addresses, please configure Address Reservation on the router for the
purpose.
Follow the steps below to reserve an IP address for your device.
1
Visit http://tplinkmodem.net, and log in with the password you set for the modem
router.
2 Go to Advanced
3
Scroll down to locate the
reservation entry for your device.
4
Enter the MAC address
5
Specify the IP address which will be reserved by the router.
6 Check to Enable this entry
12 2

IPv6 LAN Settings

Based on the IPv6 protocol, the modem router provides two ways to assign IPv6 LAN
addresses:
• Configure the RADVD (Router Advertisement Daemon) address type
• Configure the DHCPv6 Server address type
12 2 1

Configure the RADVD Address Type

1 Visit http://tplinkmodem.net, and log in with the password you set for the modem
router.
2
Go to Advanced
> Network > LAN Settings
Address Reservation
of the device for which you want to reserve IP address.
and click OK
> Network > LAN Settings.
Specify Your Network Settings
page and select IPv4.
table and click
to make the settings effective.
Add to add an address
86